( ... items )

FIELData Industrial

Ud. está en: Inicio » Productos » Catálogo de Productos » SEÑALES » Otros-Señales »

Data Loggers - Humedad y Temperatura Dual THT-HR

The THT-HR is a small Three Channel High Resolution (10 bit) Humidity and Temperature data logger. *64,000 sample capacity.
  • Detalles de Productos
  • Pregunta sobre este artículo

Data Loggers - Humedad y Temperatura Dual THT-HR

Señales - Otros THT-HR -- Intech
Data Loggers 15-1053 15


HR Series loggers are small, single and multi channel loggers housed in a rugged 20mm diameter 304 stainless steel case. High accuracy and large storage capacity make the HR series ideal for most industrial and commercial applications.

The HR loggers can also be left connected permanently to the PC for instantaneous viewing of the data. All data is real time (time and date stamped). All TruTrack loggers will connect directly to a modem for remote down loading of data and can also send SMS messages on an alarm condition.

The THT-HR is a small Three Channel High Resolution (10 bit) Humidity and Temperature data logger. *64,000 sample capacity.
The humidity and temperature sensors are housed in a 60 micron Stainless Steel filter at the top of the logger. There is an additional external temperature sensor with a soil penetration probe and 1500mm of cable.
The THT-HR uses a Sensirion SHT11 digital humidity sensor giving ±3.0%RH accuracy from 20%RH to 80%RH.

. alt



  • 304 Stainless Steel case.
  • 1 to 5 year battery life depending on usage, factory replaceable. Data is retained in the event of battery failure.
  • High Accuracy:
◦ 16 bit = HT-HR, Tc-HR, Pt-HR and mV-HR.
◦ 12 bit = T-HR, WT-HR, pH-HR and GP-HR.
  • Over 500,000 readings can be stored (* except as stated below).
  • User selectable sampling rate from 1 second to 10 hours in 1 second increments.
  • Operating range of -30°C to +70°C (-22°F to +158°F).
  • DLC3USB [USB] or DLC3 [RS232] download cable is used with all HR Series loggers.

Ordering Information:

Order code: Description:
T-HR Single Temperature
HT-HR Humidity & Temperature
THT-HR Humidity & Dual Temperature
Tc-HR Thermocouple Temperature, Accepts Type J,K,N,R and T probes (Does not include Thermocouple probe)
HHT-03 Type K Thermocouple Mini-Spear probe for Tc-HR, range -30/+300C (Other types of thermocouple probes are also available)
Tc-HR Plug Set 70mm lead c/w plugs (Specify thermocouple type)
Pt-HR RTD Pt100/Pt500/Pt1000 Temperature (Does not include RTD probe)
TP-Pt100 Pt100 temperature probe for Pt-HR, range -100~150C
mV-HR ±50mV / ±100mV / ±200mV / ±400mV (Does not include test lead)
mV-HR Lead Test Lead set for mV-HR logger
WT-HR Water Level / Temperature (see WT-HR page for ordering codes)
pH-HR pH / Temperature (Does not include probe)
M-## pH probe pH probe for pH-HR. Note: We recommend using a pH probe that has a built in Pt100 temperature sensor for the best possible accuracy with the pH-HR.
pH-HR Plug Set Fit plug set to pH probe for use with pH-HR logger.
GP-HR General Purpose (see GP-HR page for ordering codes)

Suscripción a Newsletter

E-mail *

Tres Medios Web Hosting