SWITCH ETHERNET SW-700
SW-700 Module Fast Ethernet Switch.
Smar SW-700 module is a Fast Ethernet Switch that provides LAN networks with 10 Base-T/100 Base-TX high-speed auto-sensing connectivity. Five ports, where one is dedicated for the Uplink will provide access for many devices and will help to eliminate traffic congestions that can't be well treated by Network Hubs.
The SW-700 is also a great choice when connecting different speed networks as Ethernet and Fast Ethernet and will also optimize finding the right path for same type of Ethernet. LED indicators for link/activity, speed, full/half duplex and collision for each individual port and one for module power.
It can be powered by the Rack or by an external 24Vdc. Power supply redundancy circuit will automatically switch from the user preferred supply to the other one in case of failure.
Industrial design, no internal fans and low EMC makes it a great option for automation and process control applications.
4 RJ-45 Regular ports
1 RJ-45 Uplink port (no cross cable to connect to a HUB or a SWITCH)
Fully compliant with IEEE 802.3 and 802.3u
Ethernet 10Base-T and High Speed Ethernet 100Base-TX
System: Power LED
Individual Ports: Collision/Speed/Active
Each port automatically enters power saving mode 10 seconds after cable disconnect.
39.9x137.0x141.5 mm (1.57x5.39x5.57 in)
Hot Swap Insertion
IMB (Inter-Module-Bus): Yes
Between Internal IMB Vcc and the External Power Supply
10 - 35Vdc
24Vdc @ 40mA idle / 80 mA with all ports active
30V @ 50mA idle / 100 mA with all ports active