INTERRUPTOR COMPACTO DE NIVEL POR CAPACITANCIA CapFox® ENT 7
||CapFox® ENT 7
|Interruptor compacto de nivel por capacitancia.
Compact capacitance level switch CapFox® ENT 7
Suitable for detecting levels of powdered and finely grained bulk solids or of liquids. Especially suitable for use in silos, hoppers, tanks and containers.
The CapFox® ENT 7 capacitance level switch forms with its associated probe a single compact unit.
The unit can be supplied with either a flexible or a rod probe. The probes, rigid or flexible (tensioned if required) can be mounted horizontally, vertically or at an angle. Flexible probes can also be retrofitted to the unit via an adapter.
The sensitivity is adjustable. CapFox® ENT 7 features a voltagefree relay contact which switches when the pre-set level is reached. The relay contact is used to control ancillary electrical equipment such as conveyors, slider valves or flaps, pumps or blowers, visual or audible alarms, or as an input to a PLC.
Minimum or maximum fail-safe mode can be selected according to process requirements.
Operating temperature range
Medium: -20 °C/+80 °C
Ambient: -20 °C/+60 °C
Process pressure 0/0.5 bar
Process connection G11/2B
Rigid rod probe
Stainless steel 1.4571 PP partly insulated, probe length 300 mm (min. length 300 mm – max. length 1,000 mm) or PTFE fully insulated, probe length 300 mm
Stainless steel 1.4571, PP partly insulated probe length 3,000 mm (min. length 1,000 mm – max. length 6,000 mm)
Supply voltage AC 230 V
Power consumption 5 VA
Relay contact: 1 voltage-free changeover contact
Contact rating: AC 250 V, 4 A (resistive load)
Fail-safe mode Integrated selector for min. or max. fail-safe mode (low/high)
Impact resistant plastic (ABS) W x H x D: 104 x 65 x 144 mm
Protection IP 65 (EN 60529)
Electrical connections 2 x cable gland PG 11
- Supply voltage DC 24 V
- Other probe lengths
- Other probe designs
- High-temperature version (HT) up to max. 220 °C