( ... items )

FIELData Industrial

Ud. está en: Inicio » Productos » Catálogo de Productos » FLUJO » Flujómetros »

Ultrasonic Transit Time Flow Meter, para montaje en muros.

Para montaje en muros. La nueva generacion de flujometros TTFM100/2009, mide el caudal mediante el cálculo del tiempo de propagación de una onda ultrasónica en un líquido, yendo flujo arriba y abajo dentro de la una tubería.
  • Detalles de Productos
  • Pregunta sobre este artículo

ULTRASONIC TRANSIT TIME FLOW METER

alt
APLICACION MODELO TECNOLOGIA MARCA
Flujo TTFM100-F1-NG   BM Tecnologie Industriale
FUNCION CODIGO SECCION
Ultrasonic Transit Time Flow Meter. 11-1008 11

GENERAL DESCRIPTION:

The Transit Time Flow Meter of TTFM100/2009 NEW GENERATION series measures flow rate by calculating the spreading time of an ultrasonic wave in a liquid, going up stream and down streamin to a pipe.

This flowmeter is mostly used to measure the flowrate of homogeneous fluids, also with a quite high percentage of suspended solids.

The measuring system is composed of a couple of ultrasonic transducers acoustically coupled to the external pipe's wall (it is also possible to use transducers in direct contact with fluid to be measured- called wetted sensors) and a HOST unit elaborating the signal that are sent and received from the transducers. The HOST unit has a DSP microprocessor, it gives signals for interfacing with the process or the control systems. .

. alt


Main Features
The TTFM100/2009 N.G. series includes a range of flow meters whose electronics is composed of a single board: high precision, high fidelity, high competitivity.

The mainfeatures are:
 

  • Clamp-on sensors: it is not necessary to stop the flow to install them; Wettedsensors.
  • ACandDCsupply: 85..264VACand24VDC.
  • Thetime difference during the measuring process couldbe0.2 ns.
  • Analog (4-20 ma), pulses (relays), frequence (OCT) and MODBUS
  • RS485outputs.
  • All the measures could be driven to the RS485 in order to save data intoaPCremotely transmittedby telemetry.


TypicalUse:
 

  • Water treatment, slurryandprocesswater pumping;
  • Flowbalancing;
  • Hydro-electric, cooling, anti-fire stations;
  • Water District Oilandchemical industries;
  • Extraction industries;
  • Food, paper and pharmaceutical industries;
  • Car industries;


Technical Features

High accuracy measuring: Linearity: better than 0.5% - Repeatability: better than 0.2%, - Accuracy: better than ± 1%

Wide measuring range:
Several types of transducers to be selected, measuring pipe sizes from DN15mm to DN6000mm with four different types of sensors + PT100 ohm when it works as heat meter.

Italian or English menu:
The different versions of TTFM100/2009 NEW GENERATION can support Italian or English display, easy to operate, in the near future other languages will be implemented.

Power supply:
24VDC and/or 85-264VAC.

Dimensions / Protection Grade:
176mm x 171mm x 70mm / IP66.

Data Logger:
4Mb Built-In memory capacity.

Output: Relay:
OCT/4-20mA/RS485.

Protocol:
M-BUS, MODBUS.








Suscripción a Newsletter

Nombre
E-mail *
Empresa
 



Tres Medios Web Hosting