Flow Rate Indicators / Totalizers with analog or pulse outputs - Field mount - Bi-directional flow rate indicator / totalizer with analog, pulse signal and flow direction outputs.
Detalles de Productos
Pregunta sobre este artículo
Field Mount F115
The F115 has been developed for applications where the direction of flow is an issue. It is required to offer two pulse signals from the flowmeter which are 90° or 270° degrees out of phase. In case of a reverse flow, the flow rate will be displayed as a negative value, the totalizers will count down and a switch output will be set. The pulse and analog outputs do reflect both flow directions.
On-screen engineering units are easily configured from a comprehensive selection.
Robust IP66, IP67 (NEMA4X) field enclosure. It is so rugged, you can even stand on it!
Intrinsically Safe available - ATEX, IECEx, FM and CSA approval for gas and dust applications.
Programming can be done by your own crew, with the sensible menu-driven structure, saving cost and irritation. Know one, know them all!
Very diverse mounting possibilities: walls, pipes, panels or directly onto outdoor sensors.
Quadrature input to detect the direction of flow.
Displays positive and negative flow rate to indicate the flow direction.
Total and accumulated total count up and down accoording to the flow direction.
Analog and pulse outputs.
Displays total and flow rate simultaneously.
Large digit selection for flow rate or total.
Flow rate: seven 17mm (0.67") or 8mm (0.31") digits.
Total - resettable: seven 17mm (0.67") digits.
Accumulated total - not resettable: eleven 8mm (0.31") digits.
Separate engineering units for flow rate and total on the display.
Green LED backlight.
Auto backup of settings and running totals in EEPROM memory.
Operational temperature: -40°C to +80°C (-40°F to 176°F).