DA 06 is mounted between the plug and the junction box and is immediately ready for operation. As the unit is supplied via the 4–20 mA loop, it does not require a separate power supply.
Detalles de Productos
Pregunta sobre este artículo
INDICADOR DIGITAL ENCHUFABLE DA 06
Indicador Digital Enchufable.
Digital plug-in display DA 06.
Cost-effective digital display unit for local indication on all transducers with 4–20 mA output and DIN 43650-A plug. Easy and quick mounting via plug-in system. Optional Ex protection (zones 0/1).
DA 06 is mounted between the plug and the junction box and is immediately ready for operation. As the unit is supplied via the 4–20 mA loop, it does not require a separate power supply. The unit is programmed via two keys on the front.
The following parameters can be set: scaling, decimal point, dampening, switch point and time delay.
In addition, the unit features a memory for min. and max. values. The settings are not lost in the event of a power failure. Out of range values (min. or max.) can be displayed as messages. The integrated diagnostics system continuously monitors all functions of the display.
The housing can be turned by 300°, the display by 330°.
Easy and quick mounting with plug-in system
Indication fully scalable as required
Housing and display can be rotated fully
Integrated diagnostic system
Open collector switching output/PNP
Optional Ex protection
Protection IP 65
Measuring range -1.999/+9.999 digits (min. and max. values scalable as required) Display 4-digit, 7 mm high, red LED display Display housing can be turned by 330° Accuracy of measurement 0.1 % ±1 digit Adjustable parameters Scaling, decimal point, dampening, switch point Min./max. value memory Allows to display the minimum and maximum values recorded during operation. Housing Plastic PA 6.6/polycarbonate W x H x D: 47 x 47 x 68 mm Housing can be turned by 300° Protection IP 65 (EN 60529)
Operating temperature range
Electronics: -25 °C/+85 °C
Storage: -40 °C/+85 °C
Electrical connection Adapter for plug to DIN 43650-A Input signal 4–20 mA, 2-wire
Switching output 1 open collector (PNP), max. 125 mA (with Ex approval max. 70 mA, 4.7 mH)
On/off delay timer: 0/100 s
Temperature influence: 0.1 %/10 K