For monitoring combustion and production processes as well as storage facilities, storage containers which require the oxygen concentration to be measured and/or controlled.
Detalles de Productos
Pregunta sobre este artículo
SONDA DE OXIGENO OXYSTEM 300 Y OXYSTEM 500
Oxystem 300, Oxystem 500
Sonda de Oxígeno.
Oxygen probe Oxystem
This compact electronic oxygen measuring probe is designed for stationary installation. It consists of a 300 mm long zirconium dioxide measuring probe with an adjustable screw fitting and control electronics. Measuring range: 0.3 to 24.6 % O2 by volume Output: 0–10 V, alternative 4–20 mA.
Oxygen probe Oxystem
Oxystem 500/Wall Mounting
Similar to Oxystem 300/Compact, but with electronics in wall mounting housing. Control electronics and zirconium dioxide probe are connected by a special 2 m long cable. Flue gas temperature up to 450 °C.
For monitoring combustion and production processes as well as storage facilities, storage containers which require the oxygen concentration to be measured and/or controlled. The unit provides inline oxygen measurement without gas treatment. A reliable dynamic zirconium dioxide O2 probe is used to generate the measured values. The advantages of the device result from the operating principle of the O2 probe. The probe is calibrated in atmospheric air. No reference gases are required. Due to the small compact design, the probe can be easily installed in the flue gas pipe. The probe provides fast and accurate measuring results. Oxystem 300/Compact is suitable for flue gas temperatures of up to 300 °C.
In situ measurement directly in the gas duct
Error-proof oxygen sensor
No gas treatment required
No test gas for calibration required
Measuring range 0.3/24.6 % O2 by volume, corresponding to: 0.12 V to 10 V Accuracy of measurement ±0.1 % O2 by vol.
Operating temperature range Medium: Type 300 max. 300 °C Type 500 max. 450 °C Ambient: 0/+50 °C
Sensor operating temperature 700 °C
Probe pipe (V2A) Ø 25 mm, L = 380 mm
Supply voltage One of the following:
AC 230 V, 10 VA
AC 110 V, 10 VA
Warming up time 5 minutes Analogue output 0–10 V
Housing Type 300: Impact resistant plastic (ABS) W x H x D: 104 x 170 x 65 mm Type 500: Sheet steel, lacquered W x H x D: 165 x 160 x 90 mm