( ... items )

FIELData Industrial

Ud. está en: Inicio » Productos » Catálogo de Productos » ANALÍTICA » Computadores »

Computador de análisis para gases de combustion MAXILYZER NG

This flue gas analysis computer with state-of-the-art technology and modern design features an integrated printer and gas treatment unit.
  • Detalles de Productos
  • Pregunta sobre este artículo


Analítica MULTILYZER NG   Afriso
Computador de análisis para gases de combustion. 10-3003 10

Flue gas analysis computer MAXILYZER NG.

This flue gas analysis computer with state-of-the-art technology and modern design features an integrated printer and gas treatment unit. The sturdy, waterproof plastic housing contains the microprocessor-controlled electronic system, the electrochemical measuring cells and sensors and the flue gas distribution system. Optimised gas distribution to the sensors and an automatic CO flushing function via a second pump protect the sensors. An efficient gas treatment system is integrated in the case lid.

Measured parameters: O2, COH2, (Options: CO20.000, NO and SO2), flue gas temperature, combustion air temperature, differential pressure, differential temperature..

. alt

Calculated parameters:

CO absolute, lambda, CO2, efficiency η, flue gas losses qA. 15- minute mean value programme for solid fuels.

When the lid is opened, all operating and connection elements are easily accessible at the upper side of the analyser. The connection pieces for pressure, temperature, charger, RS232 interface and connections for the flue gas combination probe are located at the left side. The large, backlit graphical display is located at the top centre. Below the display are 3 soft keys. The integrated thermal printer for hardcopies on printer paper can be found at the bottom. A foil keypad can be found at the right side.

The display has four lines with an additional status line, graphical representation, zoom and hold functions as well as an electronic core search function and sensor status diagnostics. Specially designed for the optimisation of solid fuel, pellet and condensing systems. The triple stage gas treatment unit is integrated in the case lid. It features a condensate cartridge, a drying cartridge with drying beads and a dust cartridge with Infiltec dust filter.

This unit protects the analyser from humidity and dirt. The system is also equipped with the following components: memory for 100 to up to 250 measurement blocks, rechargeable battery for 24 hours of operation and power supply unit with intelligent quick-charge technology.

Special features:

  • Dust and waterproof device housing with vent valve
  • Maximum sensor equipment: O2, COH2, NO, CO20,000 and SO2
  • 4 measured values on bright, backlit LCD
  • Additional flushing function, depending on measured concentration
  • Automatic device monitoring
  • CO limit value monitoring with sensor protection function
  • Graphical evaluation of measured values, combustion chart (online function)
  • Innovative sensor core with selective filter replacement for prolonged service life
  • Powerful battery, approx. 24 hours of operation with active display backlit function
  • Intelligent charging technology via external power supply unit
  • Hold function, zoom function, core search function, conversion of units

Scope of delivery

MAXILYZER NG with 2, 3 or 4, max. 6 sensors. Case with battery charger, ambient air sensor, flue gas combination probe, operating instructions and accessories.
TÜV By RgG 210

Technical specifications

Flue gas temperature
Measuring range: 0 °C/+1,000 °C
Resolution: 1 °C
Thermocouple: NiCr-Ni (type K)

Outside wall/air temperature
Measuring range: -20 °C/+200 °C
Resolution: 0.1 °C
Thermocouple: NiCr-Ni (type K)

Draft/differential pressure
Measuring range: ±150 mbar
Resolution: 0.01 hPa

O2 measurement (electrochemical measuring cell)
Measuring range: 0/20.9 % by vol.
Resolution: 0.1 % by vol.

CO2 determination (calculation on the basis of O2)
Range: 0/CO2 max.
Resolution: 0.1 % by vol.

CO measurement (electrochemical measuring cell, with H2 compensation):
Measuring range: 0/4,000 ppm
Resolution: 1 ppm


CO measurement solid fuels (without H2 compensation):
Measuring range: 0/2.0 % by vol. (20,000 ppm)
Resolution: 0.01 % by vol.

NO measurement (electrochemical measuring cell)
Measuring range: 0/2,000 ppm
Resolution: 1 ppm

SO2 measurement (electrochemical measuring cell)
Measuring range: 0/2,000 ppm
Resolution: 1 ppm

Weight: Approx 2.8 kg
Dimensions W x H x D: 273 x 125 x 247 mm

Gas treatment system for MAXILYZER/MAXILYZER NG


Maintenance information Handle the gas treatment system with patented water stop system with special care in order to ensure maximum protection of your MAXILYZER analysis computer.
Ensure that the following parts are replaced in good time:
09 Teflon membrane
07 Infiltec fine filter
13 Drying beads
It is recommended to order these parts along with the system.


Suscripción a Newsletter

E-mail *

Tres Medios Web Hosting