Filters are used to remove solid matter from gases to be analysed.
Detalles de Productos
Pregunta sobre este artículo
FILTROS UNIVERSALES PARA ANALISIS DE GAS
Filtros universales para analisis de gas.
Universal filters for gas analysis.
Universal filter, not heated
Filters are used to remove solid matter from gases to be analysed. For optimum filtering performance and removal of extremely small particles, very fine and efficient filter elements are used. The filters are available with or without liquid alarm sensors. The liquid sensor can detect ingress of liquids (e.g. if a gas dryer, used upstream of the unit, is defective). If condensate water leaks through, the stream flow effect directs the drops to the sensor. The liquid sensor uses the conductivity measurement principle. The electronic control unit for the liquid alarm sensor has a relay output which can be used to operate a pump or a solenoid valve or to signal an alarm. If condensate leaks through, the filter housing acts as a buffer space to prevent the liquid from reaching other components immediatly.
Inlet: Top or side Outlet: side only 3 x G1/4 female threads
Filter housing: Makrolon Filter insert Teflon (PTFE), mesh size 2 μm or glass fibres, mesh size 0.1 μm Gas pressure: Max. 5 bar Filter surface: 70 cm2 Dead volume: 65 cm3 Mounting Wall mounting with bracket Ambient temperature for evaluation electronics -5 °C/+55 °C Relay output Relay contact: 1 voltage-free changeover contact Contact rating: AC 250 V, 750 VA DC 12 V, 1 A Sensor cable length: 1.5 m Supply voltage AC 230 V or AC 115 V Power consumption: 2 VA Dimensions: refer to drawing
Weight Universal filter approx 0.31 kg
Evaluation electronics approx. 0.35 kg
Please enquire for other filters, variable area flow meters, gas pumps, solenoid valves, changeover cocks, heated withdrawal pipes and other gas treatment equipment.